Mijas Costa is a coastal strip that connects Marbella and Fuengirola. In it the characteristics of both are perfectly mixed, giving rise to a place full of elegance and activity.
FOUNDATION AND STRUCTURE The foundation is designed with braced reinforced concrete slabs (with braced slab and centering and tying beams) embedded in a competent geotechnical unit. In case of not reaching said stratum, concrete wells will be used in mass for it. The structural system consists of reinforced concrete pillars of rectangular section on which they support plates of reticular forging or solid slab. It is foreseen the possibility of having the presence of hanging beams due to the lights to be saved.
COVERS The transitable and non-passable covers over living spaces will have a slope of 1% to 5% and will be composed of; vapor barrier, thermal insulation based on extruded polystyrene of 50 kg / m3 and 5 cm. of thickness, formation of slopes with lightened concrete with arlite, made by encintado of limatesas, valleys and joints with teachers of ceramic hollow double brick, fratasada and clean, waterproofing by Adhered asphalt fabric, geotextile and layer of protection of cement mortar of 2 cm thick, fratasada, prepared for screed. For the case of terraces / porches and roofs arranged over non-habitable spaces, the following will be used: waterproofing made with Asphaltic cloth adhered with primer to the cement mortar support, slope of 1% to 5%, smooth finish, and protected with a separating layer. non-woven geotextile composed of polyester fibers bonded by needling, with a surface mass of 200 g / m2 and cement mortar protection layer of 2 cm thickness, fratasada, prepared for screed. All this on a slope formation with lightened concrete with arlite.
FACADE In general lines formed, on its outer face by solid brick perforated in the outer sheet to be covered or with exposed face brick, according to the design of the façade, interior mud with mortar and dry partition, - pladur system - in the inner leaf with double plasterboard of 13 mm. Thermal and acoustic insulation with rock wool, according to CTE DB-HE "Energy Saving". The external coatings will be continuous and made with casings with traditional hydrophobic mortars reinforced and reinforced in the mesh material changes (e = 2 cm in both vertical and horizontal). Some areas of the building will be plated with porcelain pieces according to the design of the architecture team in the MODE-LO DEEP WHITE NATURE ANTISLIP 30x60 of URBATEK, PORCELANOSA. Water-repellent and waterproofed flashing using a first layer of acrylic rubber mastic, on which is placed a fiberglass felt reinforcement, mallaflex, and subsequent application of a second layer of acrylic rubber putty. After the waterproofing, a special piece of sill made of polymeric concrete or similar will be available.
CARPENTRY AND GLASSWORK All the exterior carpentry of the living room in ALUMINUM lacquered brand CORIZIZO series COR-4500, COR VISION, COR-70 IND., Color 17GTR-INOX POLISHED GRAT. With thermal bridge breakage. The liftable slides will have a barrier-free version, where the door frame is flush and includes a flat threshold for a comfortable and unimpeded transition from the interior to the exterior or polymeric concrete or similar. Wall Curtain Glasses PLANITHERM 4S 6.6 / 12 / 6.6; Climalit glasses of different thicknesses depending on the size 5.5 / 12 / 4.4, 4.4 / 12 / 4.4, 4.4 / 12/6; Safety railings 8 + 8 or 10 + 10 (depending on the size) with anchoring system to the factory (laminar and safe tempered glass) type Q-railing Easy Glass.
Reference: A2036
Terrace:0 m²
Pool:Communal Pool
Garden:Community
Parking:Community
Orientation:South
Views:Beach, Green Zones, Garden, Open views, Pool